ADVANTAGES USING THE G&G ADJUSTABLE CALIBRATION SLEEVES IN PRODUCTION
- Adjustable diameters
- Outside pipe diameter adjustable during production.
- No down time during adjustments (Allen key)
- No re-work at the initial start up
- Sleeve adjustments are independent from extruded pipe shrink
- A wide range of adjustments allows for all tolerance levels with one sleeve
- Allows diameter adjustments during production with variable line speeds.
- Compensates for water cooling temperature changes.
- Long run times. Abrasives can be offset by using adjustments.
- Fully automatic operation using an optional step motor.
| Type | Adjustment range in diameter in mm |
Dimensions Ø x length in mm |
Weight in kg |
|---|---|---|---|
| 32 PE, PP, PVC | 1,0 | 270 x 284 | 12 |
| 40 PE, PP, PVC | 1,2 | 270 x 284 | 13 |
| 50 PE, PP, PVC | 1,4 | 270 x 284 | 15 |
| 63 PE, PP, PVC | 1,6 | 270 x 336 | 18 |
| 75 PE, PP, PVC | 1,8 | 320 x 336 | 21 |
| 90 PE, PP, PVC | 2,2 | 320 x 336 | 22 |
| 110 PE, PP, PVC | 2,6 | 350 x 453 | 24 |
| 125 PE, PP, PVC | 2,8 | 350 x 490 | 28 |
| 160 PE, PP, PVC | 3,0 | 350 x 510 | 31 |
G+G_Verstellbare_Kalibriereinsaetze (PDF / 71.32 KB)